Tradeskill PowerArmor Guide

Tradeskill PowerArmor Guide

Mission 1 - Rivets all the way

• Talk to Snacki in J16 to get started.
• Provide 50 Rivets and 50 Metal Plates and give it to Snacki.

General Tip:
Set your Navray to locate the GoGuardian in the sector Rivets will drop from DoY units. Hacking around 80 is recommended Metal Plates can be found in Plaza 2

Mission rewards

• 25.000 NC
• 6.500 XP

Mission 2 - Copbot Slayer

• If done on a Tradeskill char, you will be asked to provide 30 Copbot heads.
• If done on a DPS char, you will need to kill 10 Copbot Defectors and loot 10 heads.

General Tip:
Copbot heads can be found on Copbot Defectors near and inside Gaia Mines (Needs hacking)

Mission rewards

• 35.000 NC
• 2x 12.000 XP

Mission 3 - Job Center Delivery

• Get a package from Pierre at Job Center (Top floor, room with Warbot statues)
• Deliver package back to Snacki together with 15 Metal Pipes and 10 Big packs of Construction grease

General Tip:
Metal Pipes can be found in Plaza 2

• After package and items have been delivered you will be asked to wait 5 min (real minutes)

Mission rewards

• You will get a plain PowerArmor and the mission will end.
• He will give you a hint on where to go next.
• 45.000 NC
• 2x 9.500 XP

Mission "4" - Coloring the PA

Putting color on the Power Armor. (Defining what Tradeskill it will be)

• Go to MB Entrance, at the bottom of the Elevator shaft is a trader called Mueller that sells Ink (200k NC or something like that)

General Tip:
The following colors are required for respective Tradeskills: Red = Repair Yellow = Constructor Grey = Barter Blue = Research Green = Recycle

• Bring the Plain PowerArmor and the Ink to Secured Doy City Center (Name of the GR)
• All the way up and you will find a NCP called Tinderella
• Give Ink and 500.000 NC and wait 5 min (5 real minutes)

Mission rewards

• Enjoy your Tradeskill PowerArmor
• 1.000 XP