Tradeskill PowerArmor Guide

Tradeskill PowerArmor Guide

Mission 1 - Rivets all the way

• Provide 50 Rivets and 50 Metal Plates and give it to (NPC in J16).

General Tip:
Set your Navray to locate the GoGuardian in the sector Rivets will drop from DoY units. Hacking around 80 is recomended Metal Plates can be found in Plaza 2

Mission rewards

• needs to be added

Mission 2 - Copbot Slayer

• If done on a Tradeskill char, you will be asked to provide 30 Copbot heads.
• If done on a DPS char, you will need to kill 10 Copbot Defunkters and loot 10 heads.

General Tip:
Copbot heads can be found on Copbot Defunkters near and inside Gaia Mines (Needs hacking)

Mission rewards

• needs to be added

Mission 3 - Job Center Delivery

• Get a package from Job Center (Top floor, room with Warbot statues)
• Deliver package back to (NPC in J16) together with 15 Metal Pipes and 10 Big packs of Construction grease

General Tip:
Metal Pipes can be found in Plaza 2

• After package and items have been delivered you will be asked to wait 5 min (real minutes)

Mission rewards

• You will get a plain PowerArmor and the mission will end.
• He will give you a hint on where to go next.

Mission "4" - Coloring the PA

Putting color on the Power Armor. (Defining what Tradeskill it will be)

• Go to MB Entrance, at the bottom of the Elevator shaft is a trader that sells Ink
• Pick the following colors are required for respective Tradeskill:

General Tip:
Red = Repair, Yellow = Constructor, Grey = Barter, Blue = Research, Green = Recycle

• Bring the Plain PowerArmor and the Ink to Doy Secure Sector (There is a GR at the bottom)
• All the way up and you will find a NCP called (Tinkerbell or something)
• Give Ink and 500.000 NC and wait 5 min (5 real minutes)

Mission rewards

• Enjoy your Tradeskill PowerArmor